2023 – Pegasus Boats Yar Class 8.2m With Twin Mercury 115hp Outboards

This is an excellent opportunity to purchase an 8.2m Yar Class ex – demonstrator workboat. She is made from HDPE making her a light and durable alternative to conventional GRP.  She has an excellent specification including Shock mitigating seats, Bimini and a radar.

Powered by twin Mercury 115hp Outboards, she boasts only 25 hours and a top speed of 40+ knots with a comfortable cruising speed of 25 knots. She has a very spacious deck with high gunwales for a safe and stable ride. She also has a large seating area at the bow and loads of storage onboard.

She includes:

Twin Mercury 115hp Outboards
4x Shark shock mitigating seats
Fusion stereo system
Garmin chart plotter
Garmin VHF radio
Garmin Radar
Mercury MFD
Forward v-berth seating area
4x cleats
High all-around gunwales
Model: Yar Class
Length (LOA): 8.2 m
Beam: 2.35m
Draft: 0.45 m
Max speed: 40+ knots
Cruise speed: 25 Knots
Capacity: 4
Load capacity: 1000Kg
Propulsion: Twin Outboards Mercury 115HP
Range: 100+ nm
fuel capacity: 200 L
Power: 12V DC
Material: HDPE

Summary of HDPE Advantages:

Virtually Indestructible + Zero Hull Maintenance
Impact Resistance
HDPE’s natural toughness and durability make HDPE capable of withstanding impact from collisions with debris, rocks, or other vessels, reducing the risk of damage and costly repairs.
Sustainable
HDPE is recyclable, making it an environmentally friendly choice for workboat hulls, with the potential for material reuse. Its low carbon footprint makes it the most sustainable choice in boat hulls.
Lightweight Material
HDPE has a lighter density than water, making it naturally float on water. This helps the buoyancy of our vessels, increasing the max payload.
Cost Effective
HDPE’s durability and low maintenance requirements can result in a reduction of operational costs over the lifespan of the workboat. Less time in the shipyard also means more time on the water.
Corrosion-Free
Unlike metals, HDPE is inert and a good isolator, therefore it doesn’t corrode, rust, or degrade when exposed to saltwater, so no galvanic corrosion!
Long Lifespan
HDPE hulls undergo no ageing and can endure prolonged exposure to UV rays without significant degradation, ensuring a longer service life for workboats.
Easily repaired
If damage occurs HDPE is easy to repair in situ using portable tools. By using the same materials flush patches can be fabricated and fitted with minimal disruption to the serviceability of the vessel.